Custom Fire Pit

[FSHJNKY]

I am putting out a feeler post to see if people want this type of fire pit. I have somebody that is looking to make some custom fire pits. It will be a six piece interlocking fire pit or more pieces if you want a bigger ring for an additional charge. You can have three or six pieces customized to your liking. When you are done for the weekend, you take the pit apart, put it in a bag or box or whatever and store it until the next time you use it.

Each of the six panels is 7.75" tall by 11.5" wide with grooves cut into them to make them interlocking. 1/8" thick steel. Paint it with high temp paint or leave it bare and let nature take its course. The pit is 18” from panel to panel and 21” to the corner of the panels where they connect.

He can do custom panels and is offering two price points. Three custom panels and three blank panels or all six custom panels. The one I am going to have made is three custom and three blank so I can do an every other panel setup.

Take a look at the pictures and if there is enough interest I will put them up on the ENH website for sale and take pre-orders. $100 for the 3 Custom panels/3 blank panels kit and $120 for the 6 custom panels kit.

[FSHJNKY]

Just got some updated pictures. He finished mine tonight and tested it out.

[GSSFC]

That’s pretty cool. What is the inside diameter of the ring when assembled?

[FSHJNKY]

That’s pretty cool. What is the inside diameter of the ring when assembled?

First post updated with dimensions.

[-HAZARD-]

Great idea. What does one of those plates weigh?

[FSHJNKY]

2.8 lbs for a blank plate. So roughly 16.8 lbs for 6 plates. It will weigh less with the custom panels because there is less material.