Supporting Members don't see this Ad. Click here to become a supporting member.

Page 2 of 2 FirstFirst 12
Results 16 to 20 of 20

Thread: Recovery Issue

  1. #16
    Rubicon's Avatar
    Rubicon is offline Ex-Coordinator & Ex-Mod Certified Trail Leader
    MappingNH Trail Scout
    Join Date
    Sep 2008
    Location
    Lyme
    Posts
    13,960

    Default

    Quote Originally Posted by Lumpskie View Post
    ...The welded base looks intact to me...
    Agreed. It is just a bung plug and was simply not completely welded from the factory anyways. In my opinion, the only damage is the bumper skin and the purposely "weak link", which is the threaded eye hook. I wish you good luck with Toyota and hope you are able to get it to a point where you are happy.
    Traction, articulation, and gearing make a good off-road rig. Just a big lift, wide mud tires, and a winch simply do not ;)

  2. #17
    Join Date
    Jan 2015
    Location
    Exeter, NH
    Posts
    732

    Default

    Oh man. I misunderstood, I thought you were saying you used the small loops under the bumper. (The transport tiedowns)

    That "tow eye" in every towing manual I've ever read on any car that uses a screw in tow eye specifically says they are only for pulling a car in neutral onto a flatbed. They are not designed for any off-angle pull, securement of the vehicle in transport, or any hard pull at all. I've seen tow guys pull on those to get someone out of a snow bank and rip the whole front clip of a vehicle off.

    Unless your owner's manual says something different, I don't know if Subaru is gonna do much. That being said, I don't have any SPECIFIC knowledge about Subarus, just that the standard procedure for the towing industry is to treat those as very fragile and only used for loading. They were originated on European import cars when we first started seeing them, but Subaru with their offroader marketing might have different standards.

    Sent from my SM-G950U using Tapatalk
    '99 TJ, 5.9L Magnum V8 swap, Ford 8.8" rear axle, HP D30 front axle w/ chromoly shafts and truss, hydro assist steering, 4.88, ARB lockers, 35s, tummy tuck
    She may not look like much, but she's got it where it counts, kid. I've made a lot of special modifications myself.

    '97 ZJ
    , 5.2 V8, 2" spacer lift on 30's, 'The Beater'

    KC1KAX

  3. #18
    Join Date
    Aug 2011
    Location
    Lowell, MA
    Posts
    2,881

    Default

    I downloaded the manual for a 2018 CrossTrek, and was quite surprised by the chosen verbiage.

    "Towing hooks and tie-down hooks/holes - If towing is necessary, it is best done by your SUBARU dealer or a commercial towing service. Observe the following procedures for safety.The towing hooks should be used only in an emergency(e.g.,to free a stuck vehicle from mud, sand or snow).

    . Use only the specified towing hooks and tie-down hooks/holes. Never use suspension parts or other parts of the body for towing or tie-down purposes.. To prevent deformation to the front bumper and the towing hook, do not apply excessive lateral load to the towing hooks."

    That to me says some lateral load is acceptable, and these are only to be used to free a stuck vehicle.




    Full section of manual for a 2018 CrossTrek


    Manual came from https://www.subaru.com/owners/vehicle-resources.html
    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	Screen Shot 2019-01-11 at 4.56.54 PM.jpg 
Views:	55 
Size:	105.1 KB 
ID:	32634   Click image for larger version. 

Name:	Screen Shot 2019-01-11 at 4.56.06 PM.jpg 
Views:	54 
Size:	99.8 KB 
ID:	32633   Click image for larger version. 

Name:	Screen Shot 2019-01-11 at 4.56.17 PM.jpg 
Views:	53 
Size:	95.7 KB 
ID:	32635  
    1992 RRC Alpine White "Grover" - Gone
    1988 Defender 90 Black "Ralph"- Gone
    2006 LR3 Tonga Green "Greenie"- Gone
    1988 RRC Portofino Red "Randy"
    1992 RRC Eastnor Green "Rocket"
    2000 DII Oxford Pearl Blue Metallic "Rompy"

  4. #19
    Join Date
    Sep 2010
    Location
    Keene, NH
    Posts
    2,460

    Default

    Quote Originally Posted by BlueberryHill View Post
    I know it's a new(er) vehicle and you want it to look mint, but scars can be a "badge" that says "I use my rig, it's not just a pretty face". Every scratch and dent on mine is a story... So fix it the best you can and you have a story!
    Sign and date it.
    --
    Agnes - 1995 Jeep Wrangler (YJ) - 4 cylinder 35" MTRs, SM465, RockTrac, 3.5" Black Diamond Suspension SUA, Ford 8.8, HPD30 w/vacuum disconnect w/4.88s, ARB lockers front and rear, front shackle reversal, rear revolvers, lotsa skids, Bullet Proof steer modified, Mastercraft seats with PRP 5 point harness
    Ruby - 2016 Jeep Wrangler Hard Rock Rubicon - bone stock except for Rock Hard skids, diff armor

  5. #20
    Join Date
    Jul 2013
    Location
    Fitchburg, MA
    Posts
    855

    Default

    Quote Originally Posted by NotThePainter View Post
    Sign and date it.
    Funny, my cousin suggested the same thing this morning when I pointed out the latest ding from following Agnes at Rausch.
    Mary Anne: 1988 YJ, 258, Weber 32/36 DGEV, AX15/231, 4.11 HP-D30 & non c-clip D35 w/Truetrac, 33" KO2's, BDS 2" lift, a bunch of skid plates, Warn 9.5ti

    The Ancient and Honorable Society of the Leaf Spring
    Tread Lightly!

    KC1EIJ
    WQZJ411

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •